Disables SNMP (Simple Network Management Protocol) community strings on the switch.
| encrypted | Community name is encrypted. |
| enc_community_name | Encrypted community name. |
| community_name | Community name in ASCII format. |
| hex | Provide value in hexadecimal. |
| hex_community_name | Community name in hexadecimal. |
| alphanumeric-community-string | Specifies the SNMP community string name. |
N/A.
This command allows the administrator to disable an snmp community. It sets the row status of the community to NotInService. When disabled, SNMP access to the switch using the designated community is not allowed.
The following command disables the community string named extreme:
disable snmp community hex 61:01
This command was first available in ExtremeXOS 12.1.
The hex keyword and hex_community_name variable were added in ExtremeXOS 15.6.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB