This command to display all policy classification capabilities supported by your device.
This command has no arguments or variables.
N/A.
The output of this command shows a table listing classifiable traffic attributes and the type of actions, by rule type, that can be executed relative to each attribute. Above the table is a list of all the actions possible on this device.
The following example displays all policy classification capabilities supported by the device:
# show policy capability The following supports related to policy are supported in this device: ---------------------------------------------------------------------- Priority Permit Deny TCI Overwrite Rules Table CoS Table Longest Prefix Rules RFC 3580 Map Policy Enable Authentication Override =========================================================================== | | D | | | | | F | | | D | T | | Q | | | Y | | | | | O | S | | I | C | M | U | | | N | A | | | | R | Y | | S | I | I | A | | | A | D | V | | D | W | S | T | A | O | R | R | | | M | M | L | C | R | A | L | R | B | V | R | A | | | I | I | A | O | O | R | O | A | L | E | O | N | | SUPPORTED RULE TYPES | C | N | N | S | P | D | G | P | E | R | R | T | =========================================================================== |MAC source address | X | X | | X | X | X | | | | | | X | |MAC destination address | | | | X | X | X | | | | | | X | |IPX source address | | | | | | | | | | | | | |IPX destination address | | | | | | | | | | | | | |IPX source socket | | | | | | | | | | | | | |IPX destination socket | | | | | | | | | | | | | |IPX transmission control | | | | | | | | | | | | | |IPX type field | | | | | | | | | | | | | |IPv6 source address | | | | | | | | | | | | | |IPv6 destination address | | | | X | X | X | | | | | | X | |IPv6 flow label | | | | | | | | | | | | | |IP source address | | | | X | X | X | | | | | | X | |IP destination address | | | | X | X | X | | | | | | X | |IP fragmentation | | | | X | X | X | | | | | | X | |UDP port source | | | | X | X | X | | | | | | X | |UDP port destination | | | | X | X | X | | | | | | X | |TCP port source | | | | X | X | X | | | | | | X | |TCP port destination | | | | X | X | X | | | | | | X | |ICMP packet type | | | | | | | | | | | | | |TTL | | | | X | X | X | | | | | | X | |IP type of service | | | | X | X | X | | | | | | X | |IP proto | | | | X | X | X | | | | | | X | |ICMPv6 packet type | | | | | | | | | | | | | |Ether II packet type | | | | X | X | X | | | | | | X | |LLC DSAP/SSAP/CTRL | | | | | | | | | | | | | |VLAN tag | | | | | | | | | | | | | |Replace TCI | | | | | | | | | | | | | |Application Layer | | | | | | | | | | | | | |Access Control List | | | | | | | | | | | | | |Port string | X | X | | X | X | X | | | | | | X | ===========================================================================
This command was first available in ExtremeXOS 16.1.
The authentication override status was added in ExtremeXOS 22.2
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB