enable mpls ldp

enable mpls ldp [{vlan} vlan_name | vlan all]

Description

Enables LDP for the specified MPLS (Multiprotocol Label Switching) configured VLAN (Virtual LAN)s.

Syntax Description

vlan Enables LDP for one or more specific VLANs.
vlan_name Enables LDP on the specified VLAN.
vlan all Enables LDP for all VLANs that have been added to MPLS.

Default

Disabled.

Usage Guidelines

When LDP is enabled, LDP attempts to establish peer sessions with neighboring routers on the enabled VLAN. Once a peer session is established, LDP advertises labels for local IP interfaces and for routes learned from other neighboring routers. By default, LDP is disabled for all VLANs that have been added to MPLS. Specifying the optional all keyword enables LDP for all MPLS configured VLANs.

Example

The following command enables LDP for all VLANs that have been added to MPLS:

enable mpls ldp vlan all

History

This command was first available in ExtremeXOS 11.6.

Platform Availability

This command is available only on the platforms that support MPLS as described in the ExtremeXOS 22.7 Feature License Requirements document.