Displays sFlow hardware table utilization statistics.
| hardware-utilization | Specifies showing hardware table utilization statistics. |
| slot | Specifies selecting slots. |
| slot_num | Specifies which slots to show statistics for. |
| all | Specifies showing statistics for all slots. |
N/A.
This command displays sFlow hardware table utilization statistics for your system.
The following example shows sFlow hardware table utilization statistics.
# show sflow hardware-utilization sFlow Hardware Table Utilization Statistics Resource Type Current Maximum % Util. -------------------- ------- ------- ------- MAC Entries 3 73727 0 Host Entries 4 73728 0 IPv4 Entries 0 73728 0 IPv6 Entries 2 36864 0 Long IPv6 Entries 0 2048 0 Total Routes 11 8192 0 IPv4 Neighbors 5 N/A N/A IPv6 Neighbors 0 N/A N/A IPv4 routes 3 N/A N/A IPv6 routes 3 N/A N/A ECMP Next Hops 2 1023 0 ACL Ingress Entries 42 10752 0 ACL Ingress Counters 0 233472 0 ACL Ingress Meters 0 12288 0 ACL Ingress Slices 0 12 0 ACL Egress Slices 0 4 0
This command was first available in ExtremeXOS 22.5.
Ability to select slots in a stack was added in ExtremeXOS 22.6.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB