Administratively disables one or all static LSPs.
| lsp_name | Identifies an LSP to be disabled. |
| all | Specifies that all static LSPs on this LSR are to be disabled. |
N/A.
On executing this command, the software de-activates the specified LSPs by setting the administrative state of each LSP to down.
The following command disables a static LSP:
disable mpls static lsp lsp598
This command was first available in ExtremeXOS 12.1.
This command is available only on the platforms that support MPLS (Multiprotocol Label Switching) as described in the ExtremeXOS 22.7 Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB