Enables MAC locking globally on the switch.
This command has no arguments or variables.
MAC locking is disabled by default.
To enable MAC locking on a specific port, you must enable MAC locking on the switch and on the port. Use the enable mac-locking ports command to enable MAC locking on a port.
The following example enables MAC locking on the switch.
enable mac-locking
This command was first available in ExtremeXOS 15.7.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB