show version

show version {detail | process name | images {partition partition}

Description

Displays the hardware serial and version numbers, the software version currently running on the switch, and (if applicable) the software version running on the power controllers.

Syntax Description

detail Specifies display of platform name.
process Specifies display of all of the processes on the switch.
name Specifies display of a specific process on the switch.
images Specifies the display of installed images.
partition Specifies display of a specific partition (primary or secondary).

Default

N/A.

Usage Guidelines

The following describes the information displayed when you execute the show version or show version detail commands:
  • Part Number—A collection of numbers and letters that make up the part number of the switch.

  • Serial Number—A collection of numbers and letters that make up the serial number of the switch.
    Note

    Note

    For information about the physical location of the serial number on your switch, refer to the section that describes your specific switch model in the hardware documentation.
  • Image—The ExtremeXOS software version currently running on the switch. If you have two software images downloaded on the switch, only the currently running ExtremeXOS version information is displayed. The information displayed includes the major version number, minor version number, a specific patch release, and the build number. The software build date is also displayed.

  • BootROM—The BootROM version currently running on the switch.

  • FPGA—The field-programmable gate array firmware version currently running on the switch (ExtremeSwitching X440-G2 and X620 only).

  • PLD—The programmable logic device firmware version currently running on the switch (ExtremeSwitching X440-G2 and X620 only).
  • Certifiied Version—Shows the OpenSSL FIPS and Linux versions built with the ExtremeXOS image.

Depending on the model of your switch and the software running on your switch, different version information may appear.

If you use the process option, you see the following information about the processes running on the switch:
  • Process Name—The name of the process.

  • Version—The version number of the process.

  • BuiltBy—The name of the software build manager.

  • Link Date—The date the executable was linked.

Example

The following command displays the hardware and software versions currently running on the switch:

show version detail
Switch      : 800621-00-01 1515G-00131 Rev 1.0 BootROM: 1.0.1.7    IMG: 21.1.0.19
              FPGA: 1.1.42.0 PLD1: 1.0.10.0 PLD2: 1.0.10.0 PLD3: 1.0.10.0 PLD4: 1.0.10.0
PSU-1       : Internal Power Supply
PSU-2       : 

Image   : ExtremeXOS version 21.1.0.19 21.1
          on Wed Dec 2 14:45:14 EST 2015
BootROM : 1.0.1.7Diagnostics : 5.1
Certified Version: ExtremeXOS Linux 3.18, FIPS ECP-2.0.12
Switch        PCB Info: EVTFC24X1A1G
Subsystem     PCB Info: EVTFC24X1A1G  

History

This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.