Renames a previously configured VLAN (Virtual LAN).
| vlan_name | Specifies the current (old) VLAN name. |
| vlan_id | Specifies the VLAN ID. |
| name | Specifies a new name for the VLAN. |
N/A.
You cannot change the name of the default VLAN “Default.”
For information on VLAN name requirements and a list of reserved keywords, see Object Names in the ExtremeXOS 22.7 User Guide.
Note
If you use the same name across categories (for example, STPD (Spanning Tree Domain) and EAPS (Extreme Automatic Protection Switching) names), we recommend that you specify the identifying keyword as well as the actual name. If you do not use the keyword, the system may return an error message.The following example renames VLAN vlan1 to engineering:
configure vlan vlan1 name engineering
This command was first available in ExtremeXOS 10.1.
The vlan_id variable is first available in ExtremeXOS 16.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB