Configures the remote ID sub-option to the default value.
| vrid | Specifies the VR on which to configure the remote ID sub-option to the default value. |
The switch MAC address.
None.
The following example configures the remote ID sub-option to use the default value on the current VR:
configure bootprelay dhcp-agent information remote-id
This command was first available in ExtremeXOS 12.4.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB