Displays all counters for Spanning Tree.
| stpd_name | Specifies an STPD (Spanning Tree Domain) name on the switch. |
| port_list | Specifies one or more ports or slots and ports. |
| counters | Displays counters for the specified port. |
N/A
None.
The following example displays the counters for port 10:10 in STP (Spanning Tree Protocol) domain r1:
Print
this page
Email this topic
Feedback
View PDF
Download EPUB
show stpd r1 ports 10:10 counters
Port 10:10
----------
Disputed BPDU : 0
Invalid BPDU : 0
Message Expiration : 0
STP BPDU Rx : 0
STP BPDU Tx : 0
STP TCN BPDU Rx : 0
STP TCN BPDU Tx : 0
STP TC BPDU Rx : 0
STP TC BPDU Tx : 0
RST BPDU Rx : 0
RST BPDU Tx : 0
RST TC BPDU Rx : 0
RST TC BPDU Tx : 0
MST BPDU Rx : 1287
MST BPDU Tx : 4
MST CIST TC BPDU Rx : 2
MST CIST TC BPDU Tx : 2
Forward Transitions Count : 1
This command was first available in ExtremeXOS 15.7.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.