Removes the DHCP (Dynamic Host Configuration Protocol) relay agent remote ID.
This command has no arguments or variables.
After using this command, or if the remote ID has not been configured, the default remote ID is the switch's MAC address.
This command removes the remote ID set by the configure ip-security dhcp-snooping information remote-id [system-name |remote-id_info] command. After running this command, or if the remote ID has never been configured, the default remote ID is the switch's MAC address. However, this default (MAC address) name does not appear in the show ip-security dhcp-snooping information remote-id command.
The following command removes the DHCP remote ID:
# unconfigure ip-security dhcp-snooping information remote-id
This command was first available in ExtremeXOS 12.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB