Displays detailed information about redundant ports.
This command has no arguments or variables.
N/A.
None.
The following command displays information on software-controlled redundant ports on the switch:
show ports redundant
Following is sample output from this command:
Primary: *1:1 Redundant: 3:1, Link on/off option: OFF Flags: (*)Active, (!) Disabled, (g) Load Share Group
This command was first available in ExtremeXOS 11.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB