configure access-list delete

configure access-list delete ruleName [ any | vlan vlan_name | ports port_list | all] {ingress | egress}

Description

Removes a dynamic ACL (Access Control List) rule from the specified interface.

ruleName	Specifies a dynamic ACL rule name.
any	Deletes this ACL as the wildcard ACL.
vlan_name	Specifies the VLAN (Virtual LAN) on which this ACL is deleted.
port_list	Specifies the ports on which this ACL is deleted.
all	Deletes this ACL from all interfaces.
ingress	Deletes the ACL for packets entering the switch on this interface.
egress	Deletes the ACL for packets leaving the switch from this interface.

The default direction is ingress.

Specifying the keyword all removes the ACL from all interfaces it is used on.

The following command removes the dynamic ACL icmp-echo from the port 1:2:

configure access-list delete icmp-echo ports 1:2

This command was first available in ExtremeXOS 11.3.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.

Published July 2019prev | next