configure erps protection-port

configure erps ring-name protection-port port

Description

Add ring protection link (RPL) owner configuration for the ERPS (Ethernet Ring Protection Switching) ring.

ring-name	Alphanumeric string that identifies the ERPS ring.
port	The slot:port number for the ring protection link (RPL) owner.

N/A.

Use this command to add ring protection link (RPL) owner configuration for the ERPS ring.

Note

This command implicitly makes the node on which it is configured the RPL owner.

The following command adds RPL owner configuration on port 5 to an ERPS ring named “ring1”:

configure erps ring1 protection-port 5

This command was first available in ExtremeXOS 15.1.

This command is available on all platforms supported in 12.6 and forward that are running ExtremeXOS.

Published July 2019prev | next