configure vlan dhcp-lease-timer

configure vlan vlan_name dhcp-lease-timer lease-timer

Description

Configures the timer value in seconds returned as part of the DHCP (Dynamic Host Configuration Protocol) response.

Syntax Description

vlan_name Specifies the VLAN (Virtual LAN) on whose ports netlogin should be disabled.
lease-timer Specifies the timer value, in seconds.

Default

N/A.

Usage Guidelines

The timer value is specified in seconds. The timer value range is 0 - 4294967295, where 0 indicates the default (not configured) value of 7200 second.

Example

The following command configures the DHCP lease timer value for VLAN corp:

configure vlan corp dhcp-lease-timer <lease-timer>

History

This command was first available in ExtremeXOS 11.0.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.