show ntp vr

show ntp {{vr}vr_name}

Description

This command shows NTP information for the specified VR.

ntp	Network Time Protocol.
vr	Specifies showing NTP information for a given VR.
vr_name	Specifies which VR to show information about. If a VR name is not specified, the VR of the current command context is used.

If a VR name is not specified, the VR of the current command context is used.

The following example shows NTP information for VR "vr1".

# show ntp
NTP                 : Enabled
Authentication      : Disabled
Broadcast-Client    : Disabled
VR                  : vr1

This command was first available in ExtremeXOS 22.2.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.

Published July 2019prev | next