configure neighbor-discovery cache locktime

configure neighbor-discovery cache {vr vr_name}{locktime locktime}

Description

Sets the time before a new entry can replace an old entry in the Neighbor Discovery Protocol (NDP) cache of neighbor IPv6 addresses\MAC addresses.

vr	Specifies setting a VR or VRF.
vr_name	Specifies the name of the VR or VRF.
locktime	Specifies setting a time before a new entry can replace an old entry.
locktime	Sets the locktime value in milliseconds with a range of 0–30,000. Default is 1,000 milliseconds.

The default locktime is 1,000 milliseconds.

The following example sets the locktime to 5,000 milliseconds:

configure neighbor-discovery cache locktime 5000

This command was first available in ExtremeXOS 11.2.

This command is available on the platforms listed for the IPv6 unicast routing feature in the ExtremeXOS 22.7 Feature License Requirements document.

Published July 2019prev | next