configure bootprelay dhcp-agent information remote-id

configure bootprelay dhcp-agent information remote-id [remote_id | system-name] {vr vrid}

Description

Configures the remote ID sub-option that identifies the relaying switch for DHCP (Dynamic Host Configuration Protocol) requests and replies.

remote_id	Specifies a text string that becomes the remote ID sub-option for the switch. Specify a text string composed of 1 to 32 characters.
system-name	Specifies that the switch name is used as the remote ID sub-option for the switch.
vrid	Specifies the VR on which to configure the remote ID sub-option.

The switch MAC address.

To display the remote-ID, use the following command: show bootprelay

The following example configures the remote ID sub-option to specify the switch name in DHCP requests and replies:

configure bootprelay dhcp-agent information remote-id system-name

This command was first available in ExtremeXOS 12.4.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.

Published July 2019prev | next