This command displays the SA cache database. The following quadruplet per SA cache entry displays: {Group, Source, originating RP, and peer}. In addition, information about the following displays: the cache uptime, aging, whether sources are local or remote, etc.
| grp-addr | Displays the SA cache within the specified group address range. |
| src-addr | Displays the SA cache within the specified source address range. |
| as-num | Displays all SA cache that originated from the specified Autonomous System (AS) number. |
| originator-rp-addr | Displays all SA cache entries that were originated by the specified rendezvous point. |
| local | Displays locally originated SA cache entries only. |
| remoteaddr | Displays the SA cache entries received from the MSDP (Multicast Source Discovery Protocol) peer with the specified IP address. |
| vrname | Specifies the name of the virtual router to which this command applies. If a name is not specified, it is extracted from the current CLI context. |
N/A.
Use this command to view and troubleshoot the SA cache database. There are various filtering criteria you can use to display just a subset of the SA cache database. The following are some of the criteria, which you can use together or separately, to display information about the SA cache:
The following command displays the SA cache database:
# show msdp sa-cache Group Address Source Address Originator Peer Address Age/Ageout In -------------------------------------------------------------------------------- 235.100.200.1 10.20.30.1 60.0.0.5 10.0.0.1 00:44:24/05:10 235.100.200.2 10.20.30.2 60.0.0.5 192.0.0.16 00:44:24/05:16 235.100.200.3 10.20.30.3 60.0.0.5 10.0.0.1 00:44:24/05:10 235.100.200.4 10.20.30.4 60.0.0.5 10.0.0.1 00:44:24/05:10 235.100.200.5 10.20.30.5 60.0.0.5 55.0.0.5 00:44:24/05:01 235.100.200.6 10.20.30.6 60.0.0.5 178.54.67.23 00:44:24/05:17 235.100.200.7 10.20.30.7 60.0.0.5 112.234.213.12 00:44:24/05:43 235.100.200.8 10.20.30.8 60.0.0.5 10.0.0.1 00:44:24/05:10 235.100.200.9 10.20.30.9 60.0.0.5 10.0.0.1 00:44:24/05:10 235.100.200.10 10.20.30.10 60.0.0.5 0.0.0.0 00:44:24/00:00 235.100.200.11 10.20.30.11 60.0.0.5 0.0.0.0 00:44:24/00:00 235.100.200.12 10.20.30.12 60.0.0.5 0.0.0.0 00:44:24/00:00 235.100.200.13 10.20.30.13 60.0.0.5 0.0.0.0 00:44:24/00:00 235.100.200.14 10.20.30.14 60.0.0.5 0.0.0.0 00:44:24/00:00 235.100.200.15 10.20.30.15 60.0.0.5 0.0.0.0 00:44:24/00:00 235.100.200.16 10.20.30.16 60.0.0.5 0.0.0.0 00:44:24/00:00 235.100.200.17 10.20.30.17 60.0.0.5 0.0.0.0 00:44:24/00:00 235.100.200.18 10.20.30.18 60.0.0.5 0.0.0.0 00:44:24/00:00 235.100.200.19 10.20.30.19 60.0.0.5 0.0.0.0 00:44:25/00:00 Number of accepted SAs : 255 Number of rejected SAs : 0 Flags: (a) Accepted, (f) Filtered by policy, (r) RPF check failed
This command was first available in ExtremeXOS 12.0.
This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the MSDP feature, see the ExtremeXOS 22.7 Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB