configure esrp delete master

configure esrp esrpDomain delete master vlan_name

Description

Deletes the specifies master VLAN (Virtual LAN) from the specified ESRP (Extreme Standby Router Protocol) domain.

esrpDomain	Specifies the name of an ESRP domain.
vlan_name	Specifies the name of the master VLAN.

N/A.

You must disable the ESRP domain before removing the master VLAN. To disable the ESRP domain, use the disable esrp {esrpDomain} command.

If you attempt to remove the master VLAN before disabling the ESRP domain, the switch displays an error message similar to the following:

ERROR: Failed to delete master vlan for domain "esrp1" ; ESRP is enabled!

If this happens, disable the ESRP domain and re-issue the configure esrp delete master command.

The following command deletes the master VLAN purple from the ESRP domain esrp1:

configure esrp esrp1 delete master purple

This command was first available in ExtremeXOS 11.0.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.

Published July 2019prev | next