Returns the specified port to the factory default setting of broadcast link.
| stpd_name | Specifies an STPD (Spanning Tree Domain) name on the switch. |
| port_list | Specifies one or more ports or slots and ports. |
All ports are broadcast link types.
If your STPD has the same name as another component, for example a VLAN (Virtual LAN), you must enter the stpd keyword to specify the STPD. If your STPD has a name unique only to that STPD, the keyword stpd is optional.
If the switch operates in 802.1D mode, any configured port link type will behave the same as the broadcast link type.
In an MSTP (Multiple Spanning Tree Protocol) environment, configure the same link types for the CIST and all MSTIs.
The following command configures slot 2, ports 1 through 4 to return to the factory default of broadcast links in STPD s1:
unconfigure stpd s1 ports link-type 2:1-2:4
This command was first available in ExtremeXOS 10.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB