Configures the interval between polls for time information from SNTP (Simple Network Time Protocol) servers.
| update-interval | Specifies an interval in seconds. |
64 seconds.
None.
The following command configures the interval timer:
configure sntp-client update-interval 30
This command was first available in ExtremeXOS 10.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB