Use this command to display the active authenticated sessions.
| all | Include sessions with 'terminated' status. |
| summary | Do not display detailed information. |
| mac-address | Specify a MAC address. |
| mac_address | Specify a MAC address. |
| ports | Port or range of ports. |
| ports | Port or range of ports. |
| agent | Specify an agent type. |
| dot1x | IEEE 802.1X Port-Based Network Access Control. |
| mac | MAC authentication. |
| web-based | Web-based authentication. |
| convergence-endpoint | Convergence-endpoint authentication. |
N/A.
None.
# show netlogin session summary Port Address type Address X W M C B ------------ ------------ ------------------------ --------- 23 mac 00:00:88:88:00:00 X 23 mac 00:00:88:88:00:01 X X 23 mac 00:00:88:88:00:02 X X 23 mac 00:00:88:88:00:03 X X 23 mac 00:00:88:88:00:04 X ------------ ------------ ------------------------ --------- X - dot1x W - web-based M - mac C - convergence-endpoint B - Blackholed in FDB
show netlogin session Multiple authentication session entries --------------------------------------- Port : 1:1 Station address : 00:04:f2:9f:48:fe Auth status : success Last attempt : Fri Nov 17 21:56:01 2017 Agent type : cep Session applied : true Server type : local VLAN-Tunnel-Attr : None Policy index : 2 Policy name : NProfile_16 (active) Session timeout : 0 Session duration : 2 days, 21:57:19 Idle timeout : 300 Idle time : 0:00:00 Auth-Override : enabled Termination time : Not Terminated
This command was first available in ExtremeXOS 16.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, and X770 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB