configure mvrp stpd

configure mvrp stpd stpd_name

Description

Configures the STP (Spanning Tree Protocol) domain to use for dynamically created VLAN (Virtual LAN)s.

mvrp	Multiple VLAN Registration Protocol.
stpd	The STP domain used for MVRP.
stpd_name	The STP domain the VLAN is to be associated. All ports of the domain will be advertised, when this VLAN gets registered.

s0.

Use this command to configure the STP domain used for MVRP.

The following example configures the default STP domain for MVRP to "stpd2":

configure mvrp stpd stpd2

This command was first available in ExtremeXOS 15.3.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.

Published July 2019prev | next