Enables UDP echo server support.
| vrid | Specifies the VR or VRF. |
| port | Specifies the UDP port. |
Disabled.
UDP echo packets are used to measure the transit time for data between the transmitting and receiving ends.
The following example enables UDP echo server support:
enable udp-echo-server
This command was first available in ExtremeXOS 11.0.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB