This command disables the Node Alias feature on specified ports. Node Alias discovers information about the end systems on a per-port basis. Information from packets from end systems, such as VLANID, source MAC address, source IP address, protocol, etc. are captured in a database that can be queried.
| nodealias | Node Alias feature that maps source IP address, MAC address, host name, and protocol on a per port basis. |
| ports | Designates that Node Alias should be disabled on specified ports. |
| port_list | Specifies on which ports to have Node Alias disabled. Designated as a port list separated by comma (,) or dash (-). |
| all | Specifies that all ports have Node Alias disabled. |
Node Alias is disabled by default on all ports.
If the port is part of a LAG (Link Aggregation Group), Node Alias should be disabled separately on each LAG port.
The following example disables Node Alias on all ports:
disable nodealias ports all
This command was first available in ExtremeXOS 22.2.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB