configure esrp add track-iproute

configure esrp esrpDomain add track-iproute ipaddress/masklength

Description

Configures an ESRP (Extreme Standby Router Protocol) domain to track a route entry in the system‘s routing table.

Syntax Description

esrpDomain Specifies an ESRP domain name.
ipaddress Specifies the IPv4 address of the route entry to be tracked.
masklength Specifies the subnet of the route entry to be tracked.

Default

Disabled.

Usage Guidelines

The track-ip metric consists of the total number of tracked IPv4 routes that are up or functional.

An ESRP domain can track eight IPv4 routes.

Note

Note

ESRP route tracking is not supported on IPv6 networks.

Example

The following command enables IPv4 route failure tracking for routes to the specified subnet:

configure esrp esrp1 add track-iproute 192.168.46.0/24

History

This command was first available in ExtremeXOS 11.0.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.