enable learning iparp sender-mac

enable learning iparp {request | reply | both-request-and-reply} {vr vr_name} sender-mac

Description

Enables MAC address learning from the payload of IP ARP packets.

request	Enables learning only for IP ARP request packets.
reply	Enables learning only for IP ARP reply packets.
both-request-and-reply	Enables learning for both request and reply packets.
vr_name	Specifies a virtual router.

Disabled.

To view the configuration for this feature, use the following command: show iparp

The following command enables MAC address learning from the payload of reply IP ARP packets:

enable learning iparp reply sender-mac

This command was first available in ExtremeXOS 12.4.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.

Published July 2019prev | next