Resets all MVRP settings for the given VLAN (Virtual LAN) id. The STP (Spanning Tree Protocol) domain, the registrar state machine settings, applicant state machine settings for the given VLAN are reset to default values.
| mvrp | Multiple VLAN Registration Protocol. |
| vlan_tag | The 802.1Q VLAN ID. |
N/A.
Use this command to reset all MVRP settings for the given VLAN id. The STP domain, the registrar state machine settings, and the applicant state machine settings for the given VLAN are reset to default values. All dynamically added ports of the VLAN are removed. If the VLAN was created dynamically, it is removed. If VLAN is not specified, MVRP settings for all VLANs are reset and the dynamic VLAN creation feature is reset to “enabled”.
The following example shows unconfiguring an MVRP:
unconfigure mvrp tag 100
This command was first available in ExtremeXOS 15.3.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB