clear l2pt counters vpls

clear l2pt counters {[vpls vpls_name {peer ipaddress} | vpws vpws_name]}

Description

Clears L2PT counters.

vpls	Optionally clears counters only on a specific VPLS.
vpls_name	Alpha numeric string identifying VPLS VPN.
peer ipaddress	Optionally clears counters only on a specific peer of the VPLS. The variable specifies an IPv4 address.
vpws vpws_name	Optionally clears counters only on a specific VPWS. The variable is an alphanumeric string identifying the VPWS VPN.

Disabled.

Use this command to clear L2PT counters.

The following example clears L2PT counters on peer 1.1.1.1 of VPLS vpls1:

clear l2pt counters vpls vpls1 peer 1.1.1.1

This command was first available in ExtremeXOS 15.5.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.

Published July 2019prev | next