This command displays the status of BGP auto-peering and the learned auto-peering interfaces and corresponding remote peer information.
This command has no arguments or variables.
N/A
All existing BGP show commands can be used to display the status of BGP peers and routes.
The following example shows the status of auto-peering:
#show auto-peering Type : BGP ISSU : In Service Router ID: 1.1.1.111 AS : 111 VLAN Neighbor IP Address Router ID Remote AS Port ISSU --------------- ------------------------ --------------- ---------- ----- ----- SYS_BGP_0400 fe80::204:96ff:fe9d:6982 3.3.3.113 113 1 In
This command was first available in ExtremeXOS 22.5.
This command is available on the Summit X670-G2, X770, and the ExtremeSwitching X590, X690, X870 series switches.
This feature requires the Advanced Edge license. For more information about licenses, see the ExtremeXOS 22.7 Feature License Requirements.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB