disable iproute ipv6 sharing

disable iproute ipv6 sharing {{{vr} vr_name} | {{vr} all}}

Description

This command disables IPv6 route sharing.

vr_name	Specifies a VR or VRF. If not specified, the current CLI context is used
all	Specifies all VR or VRF.

By default, IPv6 route sharing is disabled.

This command disables IPv6 route sharing for the IPv6 address family and VR.

The following example disables IPv6 route sharing for the IPv6 address family and the VR of the current CLI context:

disable iproute ipv6 sharing

This command was first available in ExtremeXOS 15.3.

This command is available on the platforms listed for the IPv6 unicast routing feature in the ExtremeXOS 22.7 Feature License Requirements document.

The ability to enable and disable ECMP (Equal Cost Multi Paths) for IPv6 is supported for all platforms.

Published July 2019prev | next