Displays the slot-specific information.
| slot | Specifies a slot on a SummitStack or bridge port extender (BPE) bridge port extender (BPE) slot assignment. |
| detail | Specifies detailed port information. |
N/A.
Note
You may see slightly different information displayed depending on the platform and configuration you are using.If you do not specify a slot number, information for all slots is displayed.
The display also includes a notice of insufficient power, should that arise.
The output of this command displays eight rows. If a node in the Active Topology is not assigned a slot number, the state of the slot is shown as Empty. A node that shows as a slot has successfully joined the active topology. This means ExtremeXOS software can communicate with this node and does not mean that the node has been successfully brought up. The card state in the display indicates whether the slot was successfully started. If the card state is Operational, then the node is being used in the stack to carry user data as configured.
The output of the command displays the slot number, type of the Summit in that slot, state of the slot, and the number of ports.
The number of ports does not include the stacking links. It includes the option card ports regardless of whether the option card is installed.
This command is not available on Summit family switches operating in non stacking mode.
The following example displays switch information for all slots in a stack:
* Slot-7 Stack.1 # show slot Slots Type Configured State Ports -------------------------------------------------------------------- Slot-1 SummitX SummitX Operational 26 Slot-2 X X Operational 50 Slot-3 X X Operational 26 Slot-4 SummitX SummitX440 Operational 26 Slot-5 X X Operational 26 Slot-6 X X Operational 26 Slot-7 X X Operational 26 Slot-8 Empty 0
The following example displays switch information for a specific slot on the stack:
* Slot-7 Stack.91 # show slot 1 detail Slot-1 information: State: Operational Download %: 100 Restart count: 0 (limit 5) Serial number: 800187-00-02 0635G-00074 Hw Module Type: SummitX450-24x SW Version: 12.0.0.17 SW Build: v1170b17 Configured Type: SummitX440 Ports available: 26 Recovery Mode: Reset Node MAC: 02:04:96:27:87:17 Current State: STANDBY Image Selected: secondary Image Booted: secondary Primary ver: 12.0.0.16 Secondary ver: 12.0.0.17 Config Selected: primary.cfg
The following example displays detailed switch information for all slots on a stack:
* Slot-7 Stack.90 # show slot detail Slot-1 information: State: Operational Download %: 100 Restart count: 0 (limit 5) Serial number: 800187-00-02 0635G-00074 Hw Module Type: SummitX SW Version: 12.0.0.17 SW Build: v1170b17 Configured Type: SummitX Ports available: 26 Recovery Mode: Reset Node MAC: 02:04:96:27:87:17 Current State: STANDBY Image Selected: secondary Image Booted: secondary Primary ver: 12.0.0.16 Secondary ver: 12.0.0.17 Config Selected: primary.cfg Slot-2 information: State: Operational Download %: 100 Restart count: 0 (limit 5) Serial number: 800163-00-04 0635G-01187 Hw Module Type: SummitX SW Version: 12.0.0.17 SW Build: v1170b17 Configured Type: SummitX Ports available: 50 Recovery Mode: Reset Node MAC: 02:04:96:27:87:17 Current State: STANDBY Image Selected: secondary Image Booted: secondary Primary ver: 12.0.0.16 Secondary ver: 12.0.0.17 Config Selected: primary.cfg Slot-3 information: State: Operational Download %: 100 Restart count: 0 (limit 5) Serial number: 800152-00-04 0630G-00736 Hw Module Type: SummitX SW Version: 12.0.0.17 SW Build: v1170b17 Configured Type: SummitX Ports available: 26 Recovery Mode: Reset Node MAC: 02:04:96:27:87:17 Current State: STANDBY Image Selected: secondary Image Booted: secondary Primary ver: 12.0.0.16 Secondary ver: 12.0.0.17 Config Selected: primary.cfg Slot-4 information: State: Operational Download %: 100 Restart count: 0 (limit 5) Serial number: 0635G-00073 S450-24X Hw Module Type: SummitX SW Version: 12.0.0.17 SW Build: v1170b17 Configured Type: SummitX Ports available: 26 Recovery Mode: Reset Node MAC: 02:04:96:27:87:17 Current State: STANDBY Image Selected: secondary Image Booted: secondary Primary ver: 12.0.0.16 Secondary ver: 12.0.0.17 Config Selected: primary.cfg Slot-5 information: State: Operational Download %: 100 Restart count: 0 (limit 5) Serial number: 800153-00-04 0646G-00683 Hw Module Type: SummitX SW Version: 12.0.0.17 SW Build: v1170b17 Configured Type: SummitX Ports available: 26 Recovery Mode: Reset Node MAC: 02:04:96:27:87:17 Current State: STANDBY Image Selected: secondary Image Booted: secondary Primary ver: 12.0.0.16 Secondary ver: 12.0.0.17 Config Selected: primary.cfg Slot-6 information: State: Operational Download %: 100 Restart count: 0 (limit 5) Serial number: 800153-00-04 0646G-00691 Hw Module Type: SummitX SW Version: 12.0.0.17 SW Build: v1170b17 Configured Type: SummitX Ports available: 26 Recovery Mode: Reset Node MAC: 02:04:96:27:87:17 Current State: BACKUP Image Selected: secondary Image Booted: secondary Primary ver: 12.0.0.16 Secondary ver: 12.0.0.17 Config Selected: primary.cfg Slot-7 information: State: Operational Download %: 100 Restart count: 0 (limit 5) Serial number: 800153-00-01 0603G-00741 Hw Module Type: SummitX SW Version: 15.5.0.0 SW Build: v1170b17 Configured Type: SummitX Ports available: 26 Recovery Mode: Reset Node MAC: 02:04:96:27:87:17 Current State: MASTER Image Selected: secondary Image Booted: secondary Primary ver: 12.0.0.16 Secondary ver: 12.0.0.17 Config Selected: primary.cfg Slot-8 information: State: Empty Restart count: 0 (limit 5) Serial number: Hw Module Type: Configured Type: Ports available: 0 Recovery Mode: Reset Node MAC: 00:00:00:00:00:00 Current State: Image Selected: Image Booted: Primary ver: Secondary ver: Config Selected:
Print
this page
Email this topic
Feedback
View PDF
Download EPUB # show slot 100 detail
Slot-100 information:
State: Operational
Description: Building1, Floor30
Download %: 100
Flags: M
Restart count: 0 (limit 5)
Serial number: 00.00.01 1705D-10009
Hw Module Type: V400-48t-10GE4
SW Version: 1.1.0.32
Configured Type: V400-48t-10GE4
Ports available: 52
Recovery Mode: Reset
Debug Data: Peer=
This command was first available in ExtremeXOS 10.1.
This command was first available on SummitStack in ExtremeXOS 12.0.
Slot description (name) information was added in ExtremeXOS 22.5.
This command is available only on SummitStacks and in VPEX mode.