show security

show security [fips-mode | python]

Description

Use this command to show FIPS mode and external Python scripting support status.

fips-mode	Shows specifically FIPS mode status.
python	Shows specifically external Python scripting support status.

N/A

If you select neither keyword option (FIPS/Python), you see status information for both.

For both FIPS mode or Python, two values appear:

The following example shows both FIPS and Python scripting status:

# show security 
FIPS Mode (current)    : Off
FIPS Mode (configured) : On
Python (current)       : Off
Python (configured)    : On

The following example shows only Python scripting status:

# show security python 
Python (current)       : Off
Python (configured)    : Off

This command was first available in ExtremeXOS 21.1.

External Python scripting support status was added in ExtremeXOS 22.7.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.

Published July 2019prev | next