configure log target xml-notification filter

configure log target xml-notification xml_target_name filter filter-name {severity [[severity] {only}]}

Description

Configures a Web server target with an EMS filter.

xml_target_name	Specifies the name of the xml notification target.
filter-name	Specifies the name of the EMS filter.
severity	Specifies the least severe level to send (if the keyword only is omitted).

N/A.

Use this command to configure a Web server target with an EMS filter. All EMS filters can be applied.

The following command configures the Web server target test2 with EMS filter filtertest2:

configure log target xml-notification test filter filtertest2

This command was first available in ExtremeXOS 12.4.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.

Published July 2019prev | next