When enabled, IPv6 packets forwarded by hardware (fast path) may trigger ICMP (Internet Control Message Protocol) redirects.
| fast-path | IPv6 packets forwarded by hardware may trigger ICMP redirects |
Disabled.
Use this command to trigger ICMP redirects when IPv6 packets are forwarded by hardware (fast-path).
The enabled or disabled setting is displayed when using the command:
# show ipconfig ipv6 Route Sharing : Disabled ICMP Redirect for Fast Path : Enabled Max Shared Gateways : Current: 4 Configured: 4 Interface IPv6 Prefix Flags v1 2001::1/24 -EUf---R- v1 fe80::204:96ff:fe1e:ec00%v1/64 -EUfP--R- Flags : D - Duplicate address detected on VLAN, T - Tentative address E - Interface enabled, U - Interface up, f - IPv6 forwarding enabled, i - Accept received router advertisements enabled, R - Send redirects enabled, r - Accept redirects enabled P - Prefix address
This command was first available in ExtremeXOS 15.2.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB