show private-vlan

Description

Displays information about all the PVLANs on the switch.

Syntax Description

This command has no arguments or variables.

Default

N/A.

Usage Guidelines

If the PVLAN is incomplete because it does not have a network or any subscriber VLAN (Virtual LAN) configured, [INCOMPLETE] appears next to the PVLAN name.

Example

The following example output displays all the PVLANs on the switch:

# show private-vlan
--------------------------------------------------------------------------------------
Name            VID  Protocol Addr        Flags                Proto  Ports  Virtual
Active router
/Total
--------------------------------------------------------------------------------------
Engineering
Network VLAN:
-Engr1         10   --------------------------------------   ANY    4 /5   VR-Default
Non-Isolated Subscriber VLAN:
-ni1           400  --------------------------------------   ANY    1 /1   VR-Default
-ni2           401  -------------------------------------    ANY    1 /1   VR-Default
Isolated Subscriber VLAN:
-i1            500  -------------------------------------    ANY    1 /1   VR-Default
Ops
Network VLAN:
-Ops           20   -------------------------------------    ANY    2 /2   VR-Default
Non-Isolated Subscriber VLAN:
-OpsNi1        901  -------------------------------------    ANY    1 /1   VR-Default
-OpsNi2        902  -------------------------------------    ANY    1 /1   VR-Default
-OpsNi3        903  -------------------------------------    ANY    1 /1   VR-Default
-OpsNi4        904  -------------------------------------    ANY    1 /1   VR-Default
Isolated Subscriber VLAN:
-OpsI0         600  -------------------------------------    ANY    1 /1   VR-Default
-OpsI1         601  -------------------------------------    ANY    1 /1   VR-Default
-OpsI2         602  -------------------------------------    ANY    1 /1   VR-Default
-OpsI3         603  -------------------------------------    ANY    1 /1   VR-Default
-OpsI4         604  -------------------------------------    ANY    1 /1   VR-Default
Sales [INCOMPLETE]
Network VLAN:
-NONE
Non-Isolated Subscriber VLAN:
-SalesNi1      701  -------------------------------------    ANY    1 /1   VR-Default
-SalesNi2      702  -------------------------------------    ANY    1 /1   VR-Default
Isolated Subscriber VLAN:
-SalesI0       800  -------------------------------------    ANY    1 /1   VR-Default
--------------------------------------------------------------------------------------
Flags : (C) EAPS Control vlan, (d) NetLogin Dynamically created VLAN,
(D) VLAN Admin Disabled, (E) ESRP Enabled, (f) IP Forwarding Enabled,
(i) ISIS Enabled, (I) IP Forwarding lpm-routing Enabled, (L) Loopback Enabled,
(l) MPLS Enabled, (m) IPmc Forwarding Enabled, (n) IP Multinetting Enabled,
(N) Network LogIn vlan, (o) OSPF Enabled, (p) PIM Enabled,
(P) EAPS protected vlan, (r) RIP Enabled,
(T) Member of STP Domain, (V) VPLS Enabled, (v) VRRP Enabled
Total number of PVLAN(s) : 3

History

This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available on all platforms that support the Private VLAN feature. For features and the platforms that support them, see the ExtremeXOS 22.7 Feature License Requirements document.

Published July 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback