Disables RIPng (Routing Information Protocol Next Generation) from redistributing routes from other routing protocols.
| direct | Specifies directly reachable subnets from the router (only interfaces that have IP forwarding enabled are exported). |
| ospfv3 | Specifies all OSPFv3 (Open Shortest Path First version 3) routes. |
| ospfv3-extern1 | Specifies OSPFv3 external route type 1. |
| ospfv3-extern2 | Specifies OSPFv3 external route type 2. |
| ospfv3-inter | Specifies OSPFv3-inter area routes. |
| ospfv3-intra | Specifies OSPFv3-intra area routes. |
| static | Specifies user configured static routes. |
| isis | Specifies IS-IS routes. |
| isis-level-1 | Specifies IS-IS Level 1 routes. |
| isis-level-1-external | Specifies IS-IS Level 1 External routes. |
| isis-level-2 | Specifies IS-IS Level 2 routes. |
| isis-level-2-external | Specifies IS-IS Level 2 External routes. |
| bgp | Specifies BGP (Border Gateway Protocol) IPv6 routes |
| e-bgp | Specifies EBGP routes. |
| i-bgp | Specifies IBGP routes. |
Disabled.
This command disables the exporting of static, direct, IS-IS, and OSPF (Open Shortest Path First)-learned routes from the switch routing table into the RIPng domain.
The following command disables RIPng from redistributing any routes learned from OSPFv3:
disable ripng export ospfv3
This command was first available in ExtremeXOS 11.2.
This command is available on platforms with an Edge, Advanced Edge, or Core license. For licensing information, see the ExtremeXOS 22.7 Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB