Enable Ping to a Virtual IP Address

Use the following procedure to enable ping to a virtual IP address. The default is enabled.

Procedure

Enter VRRP Router Configuration mode:

enable

configure terminal

router vrrp
Enable ping to a virtual IP address:

ping-virtual—address enable [vrf WORD<1–16>]

default ping-virtual—address enable [vrf WORD<1–16>]
Display the configuration:

show ip vrrp [vrf WORD<1–16>]

Example

Switch:1>enable
Switch:1#configure terminal
Switch:1(config)#router vrrp
Switch:1(config-vrrp)#ping-virtual-address enable vrf mgmtrouter
Switch:1(config)#show ip vrrp vrf mgmtrouter

=====================================
VRRP Global Settings - VRF mgmtrouter
=====================================
ping-virtual-address : enabled
send-trap : enabled

Variable definitions

Use the data in the following table to use the ping-virtual—address enable and show ip vrrp commands.


Variable	Value
enable	Enables ping to a virtual IP address.
vrf `WORD<1–16>`	Specifies the VRF.