Clears a slot of a previously assigned module type.
| slot | Specifies the slot number. |
N/A.
All configuration information related to the slot and the ports on the module is erased. If a module is present when you issue this command, the module is reset to default settings.
If a slot is configured for one type of module, and a different type of module is inserted, the inserted module is put into a mismatch state (where the inserted module does not match the configured slot), and is not brought online. To use the new module type in a slot, the slot configuration must be cleared or configured for the new module type. Use the enable mirroring to port tagged command to configure the slot.
The following command clears slot 2 of a previously assigned module type:
clear slot 2
The following command clears slot 4 of a previously assigned module type in a stack:
clear slot 4
This command was first available in ExtremeXOS 10.1.
This command is available on modular switches and SummitStack.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB