Allows the fabric configuration to be turned off.
| auto | Automatically configures fabric flow control based on the priority flow control RX configuration. |
| off | Unconfigures the fabric flow control. |
Auto.
Use this command to turn off fabric configuration or return it to the default auto mode.
The following command turns off the fabric configuration:
configure forwarding flow-control fabric off
The following command returns fabric configuration to the auto mode:
configure forwarding flow-control fabric auto
This command was first available in ExtremeXOS 12.5.
This command is available only on 10G ports and on specific models of the following newer platforms indicated by the part number:
BlackDiamond 8900-10G24X-c modules (manufacturing number 800397-00) BlackDiamond 8900-40G6X-xm modules, 40G ports and 10G ports when in 4x10 partition mode BlackDiamond X8 switches, Summit X460 switches, Summit X460-G2 switches, 10G ports Summit X650-24t switches (manufacturing number 800394-00) Summit X650-24x switches (manufacturing number 800395-00) Summit X650 VIM-10G8X (manufacturing number 800396-00) Summit X670 switches, Summit X670-G2, 10G ports Summit X670V switches 10G and 40G ports, and Summit X770 switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB