configure msrp sharing

configure msrp sharing [all | port_list] bandwidth [cumulative | single-port] percentage

Description

This command configures the LAG bandwidth mode as either cumulative or master-port only.

Syntax Description

all	All the ports in the switch.
`port_list`	Port list separated by a comma or -
cumulative	Use bandwidth of a single port, plus a percentage of bandwidth of every other LAG member port in the group.
single-port	Use bandwidth of a single port only for the entire LAG.
`percentage`	Percentage of bandwidth of each LAG port to be added to master port bandwidth.

Default

Single-port.

Usage Guidelines

If cumulative mode is selected, the percentage is also configured.

Example

This CLI command displays bandwidth information of an MSRP port.

# show msrp ports bandwidth 
Port       Port  Class    Delta    Maximum   Reserved   Available
          Speed                    Effective 
------   ------- -----   --------- ---------  ---------  --------- 
5ab          0 M A          75.00%   0.00%       0.00%      0.00%
                 B           0.00%   0.00%       0.00%      0.00%
*21ab     1000 M A          75.00%   75.00%      0.00%     75.00% 
                 B           0.00%   75.00%      0.00%     75.00% 
Flags: (*) Active, (!) Administratively disabled,  
       (a) SR Class A allowed, (b) SR Class B allowed.

History

This command was first available in ExtremeXOS 16.2.

Platform Availability

This command is available on Summit X430, X440, X450-G2, X460, X460-G2, X670, X670-G2, and X770 switches if the AVB feature pack license is installed on the switch.

Published August 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback