configure netlogin trap

configure netlogin trap max-users [enable | disable]

Description

Use this command to set the NetLogin trap setting for system, module and port.

enable	Enable sending traps when max users reached in system
disable	Disable sending traps when max users reached in system

Disabled.

None.

This example shows how to enable the NetLogin maximum users trap setting:

configure netlogin trap max-users enabled

This command was first available in ExtremeXOS 16.1.

This command is available on the Summit X450-G2, X460-G2, X670-G2, and X770.

Published August 2016prev | next