Enables the MPLS RSVP-TE fast reroute (FRR) protection feature.
This command has no arguments or variables.
Enabled.
You can configure FRR LSPs only when FRR is enabled on the LSR. Enabling FRR protection on the LSR automatically enables the point-of-local-repair and merge-point capabilities on the LSR. FRR should be enabled on all LSRs along each FRR LSP path.
The following command enables FRR protection on the local switch:
enable mpls rsvp-te fast-reroute
This command was first available in ExtremeXOS 12.1.
This command is available only on the platforms that support MPLS as described in the Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB