Displays the router discovery settings.
| vlan_name | Specifies an IPv6 configured VLAN. |
N/A.
If no VLAN is specified, the settings are displayed for all IPv6 configured VLANs.
The following example displays router discovery settings for the VLAN "top_floor":
# show router-discovery vlan top_floor Router Advertisements disabled on v1 Minimum/Maximum Interval: 200 / 600 Managed / Other Info Flags: Off / Off Link MTU: 0 Reachable Time: 0 Retrans Timer: 0 Current Hop Limit: 64 Default Lifetime: 1800 Number of Prefixes: 1, Prefix List: Valid Preferred Prefix Lifetime Auto Lifetime OnLink 2001:db8::1/64 2592000 On 604800 On
This command was first available in ExtremeXOS 11.2.
This command is available on the platforms listed for the IPv6 unicast routing feature in the Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB