configure mvrp stpd

configure mvrp stpd stpd_name

Description

Configures the STP domain to use for dynamically created VLANs.

mvrp	Multiple VLAN Registration Protocol.
stpd	The STP domain used for MVRP.
`stpd_name`	The STP domain the VLAN is to be associated. All ports of the domain will be advertised, when this VLAN gets registered.

s0.

Use this command to configure the STP domain used for MVRP.

The following example configures the default STP domain for MVRP to "stpd2":

configure mvrp stpd stpd2

This command was first available in ExtremeXOS 15.3.

This command is available on all platforms.

Published August 2016prev | next