Configures metering on ingress and/or egress ports.
| port_list | Specifies the ports. |
| ingress | Specifies ingress ports only. |
| egress | Specifies egress ports only. |
| ingress-and-egress | Specifies both ingress and egress ports. |
Ingress.
Use this command to configure metering on ingress and/or egress ports.
The following command configures metering on port 2 egress:
configure ip-fix ports 2 egress
This command was first available in ExtremeXOS 12.5.
This command is available on BlackDiamond 8900 G96Tc, G48T-xl, G48X-xl, and 10G8X-xl modules and Summit X460, X460-G2, X480, and E4G400 switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB