enable ces

enable ces [ces_name | all]

Description

Enables the administrative status of the specified circuit emulation service (CES) pseudowire.

`ces_name`	Alphanumeric string identifying the CES pseudowire.
all	All CES pseudowires in the switch.

The default administrative state is enable.

Use this command to enable a specific CES pseudowire, or to enable all CES pseudowires in the switch.

This example enables all CES pseudowires in the switch:

enable ces all

This command was first available in ExtremeXOS 15.1.

This command is available on the cell site routers (E4G-200 and E4G-400).

Published August 2016prev | next