disable network-clock ptp end-to-end-transparent ports

disable network-clock ptp end-to-end-transparent ports port_list

Description

Disable PTP end-to-end-transparent clock functionality (1-step PHY timestamp) on the specified ports.

port_list

Specifies a port or group of ports.

N/A.

Use this command to disable 1-step transparent clock on the specified ports.

The following example disables end-to-end-transparent clock on front panel port 2:

disable network-clock ptp end-to-end-transparent ports 2

This command was first available in ExtremeXOS 15.1.

This command is available on the cell site routers E4G-200 and E4G-400.

Published August 2016prev | next