configure network-clock ptp delete

configure network-clock ptp [boundary | ordinary] delete [{vlan} vlan_name | vlan all]

Description

Deletes a given clock port (VLAN), or all clock ports added to the specified PTP clock instance.

boundary	Boundary clock instance.
ordinary	Ordinary clock instance.
vlan	VLAN.
`vlan_name`	Name of the specific VLAN to be added to or deleted from the PTP clock instance.
all	Add or delete all VLANs.

N/A.

Use this command to delete a given clock port (VLAN), or all clock ports added to the specified PTP clock instance.

The following example deletes all clock ports from the boundary clock:

configure network-clock ptp boundary delete vlan all

The following example deletes vlan lpbk-gm from the ordinary clock:

configure network-clock ptp ordinary delete vlan lpbk-gm

This command was first available in ExtremeXOS 15.1.

This command is available on the cell site routers (E4G-200 and E4G-400).

Note

PTP commands can be used only with the Network Timing feature pack.

Published August 2016prev | next